Icon K93152 Stage 2 1-3" Suspension System for Ford F150 2017-2020

After hundreds of hours of R&D and thousands of miles of real world on and off-road testing, Icon engineers have developed products that provide a true performance upgrade over the factory components found on the 2017-2020 Ford F150 Raptor. The Gen. 2 Raptor is faster, lighter, and smarter than its older brother - suspension mounting locations have changed, a significant amount of weight was trimmed off of the truck, and new technology has been introduced both on the side of safety and performance. In typical Icon fashion, the new Raptor was pushed to its limits in stock trim to build a list of performance "needs and wants". After this process, the Icon engineering team began to go over the truck front to rear to identify any opportunities to overcome the limits of the OE suspension and achieve the gains laid out in the previous phases of R&D.

The rear of the updated Ford Raptor was a highlight for Icon engineers, as new changes proved to be for the better. One significant change was that the shock mounting layout went from a parallel style setup to an offset design. While this is great for controlling axle wrap, it required a thorough re-evaluation of the way Icon shocks would need to function to make the most of the refreshed rear end. In the R&D process it was found that Gen. 2 had more available wheel travel than the original Raptor, and by way of an offset upper eyelet Icon engineers laid out a 3.0 Series bypass shock that maximized travel while utilizing the factory shock mounts. To control the rear end in specific ranges of travel, these shocks feature 3 unique bypass zones - 2 on the compression stroke and one rebound. Unlike other shocks that have a loud bypass "click" when functioning, Icon bypass valves feature damped valve stops for quiet and precise operation. Easy-to-adjust knobs allow for quick changes to shock tuning without the need for tools, enabling the user to dial in their ride with minimal down time.

Icon's billet aluminum upper control arms are designed with built-in caster correction for predictable handling and feature on-vehicle camber/caster adjustment for precise vehicle alignment. These upper control arms include Icon's patented delta joint. The delta joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the delta joint while at the same time allowing for noise-free operation.

ICON Vehicle Dynamics products are proudly designed, manufactured, and assembled in Riverside, California by a team of passionate off-road enthusiasts. With a reputation for quality, performance, and service it's clear that ICON Vehicle Dynamics is the top choice for performance suspension systems and shock absorbers for the 2017-2020 Ford F150 Raptor.

System Components

• 95002 (Qty: 1) | 17-20 Raptor front 3.0 VS RR CDCV coilover kit
• 98562DJ (Qty: 1) | 10-20 Raptor billet UCA DJ kit
• 95205 (Qty: 1) | 17-20 Raptor rear 3.0 PB pair

Notes:

• Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
• 2019-2020 vehicles with factory live valve shocks will need an Icon damper interface device (PN: 95199) to allow the vehicle drive modes to operate correctly with the OE shocks removed