Icon K93151 Stage 1 1-3" Suspension System for Ford F150 2017-2020

After hundreds of hours of R&D and thousands of miles of real world on and off-road testing, Icon engineers have developed products that provide a true performance upgrade over the factory components found on the 2017-2020 Ford F150 Raptor. The Gen. 2 Raptor is faster, lighter, and smarter than its older brother - suspension mounting locations have changed, a significant amount of weight was trimmed off of the truck, and new technology has been introduced both on the side of safety and performance. In typical Icon fashion, the new Raptor was pushed to its limits in stock trim to build a list of performance "needs and wants". After this process, the Icon engineering team began to go over the truck front to rear to identify any opportunities to overcome the limits of the OE suspension and achieve the gains laid out in the previous phases of R&D.

The front end geometry of the Gen. 2 Raptor was found to be fairly similar to the previous model truck, however the shock mounting points had been moved higher up on the chassis. Seeing this as an opportunity, the team was able to design a 3.0 Series coilover that has more shaft travel while utilizing a barreled coil spring for more efficient packaging. The vehicle-specific valving featured in these shocks and the all new Icon-engineered spring work together to provide exceptional on-road ride quality with excellent off-road characteristics. ICON's multi-stage hydraulic "bump zone" adds to the performance capability by providing an exponential increase in damping ability during the last 40% of compression travel for superior bottom-out resistance. In the ride zone, these 3.0 Series coilovers see a 50% increase in damping ability with the use of a significantly larger piston than what is found in the factory shocks. New 10" finned aluminum reservoirs provide a generous amount of shock oil while also providing an increase in surface area (over 200%) for enhanced cooling and consistent damping. The addition of ICON's CDC valve technology provides 10 settings of damping adjustment allowing the end-user to adjust the "feel" of the shocks for different terrains and vehicle cargo configurations.

System Components

• 95002 (Qty: 1) | 17-20 Raptor front 3.0 VS RR CDCV coilover kit
• 95205 (Qty: 1) | 17-20 Raptor rear 3.0 PB pair

Notes:

• Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle
• 2019-2020 vehicles with factory live valve shocks will need an Icon damper interface device (PN: 95199) to allow the vehicle drive modes to operate correctly with the OE shocks removed