8.75" Nitro Gear Package - Toyota Tacoma 2016-2023

Brand: Nitro Gear & Axle
Part Number: GPTAC2016-XXX-875

Options

Free shipping over $75
Check your Fitment

Vehicle Fitment

  • Toyota Hilux (2016-2023)
  • Toyota Tacoma (2016-2023)

Description

Toyota 8.75" 4.88 or 5.29 Ratio Nitro Front & Rear Gear Package Kit

Fits:
2016-2023 Tacoma Automatic with OEM locker
2016-2023 TacomaManual with or withoutOEM locker
2016 & Newer Hilux Revowith or withoutOEM Locker*

Recommended: 6 quarts of Nitro Synthetic Plus Gear Lube

Nitro Gear Package for 16+ Toyota Tacoma is one of Nitro's biggest sellers because these trucks need regeared. The Tacoma has a very tall overdrive in 5th AND 6th gear to turn low RPMS. The new 3.5l V6 makes plenty of horsepower, but needs to reach it's power band. Even with stock tires we have found the 6th gear is nearly useless, the gearing is so high that the transmission is constantly shifting.
In a STOCK Tacoma, automatic 6th gear puts you at ~1500 RPM @ 60MPH. This simply does not work. You may not realize it, but you probably are hardly ever in 6th gear unless you are almost going downhill. By regearing you can bring the motor back to the RPM it needs to be. This will improve Economy, Performance, and shifting. This is one of the most important modifications you can make to your late model Tacoma whether on a stock truck, or especially when running oversized tire. This is the only way to properly compensate for inadequate factory gearing and the increase in tire diameter. We often hear people are worried they will turn high rpm's if they regear. This is simply not the case. Remember, the Auto trans has a double overdrive. See the below examples: Example

Tech Note:

*Will not fit Dana built rear axle

-Fits 3.91 & up carrier.

-Fits factory OEM carrier or ARB RD111.

-Only fits models with automatic transmissions and OEM E-locker or manual transmission models.

Nitro Gear Package for 16+ Toyota Tacoma is one of Nitro's biggest sellers because these trucks need regeared. The Tacoma has a very tall overdrive in 5th AND 6th gear to turn low RPMS. The new 3.5l V6 makes plenty of horsepower, but needs to reach it's power band. Even with stock tires we have found the 6th gear is nearly useless, the gearing is so high that the transmission is constantly shifting. In a STOCK Tacoma Automatic 6th gear puts you at ~1500 RPM @ 60MPH. This simply does not work. You may not realize it, but you probably are hardly ever in 6th gear unless you are almost going downhill. By regearing you can bring the motor back to the RPM it needs to be. This will improve Economy, Performance, and shifting. This is one of the most important modifications you can make to your late model Tacoma whether on a stock truck, or especially when running oversized tire. This is the only way to properly compensate for inadequate factory gearing and the increase in tire diameter. We often hear people are worried they will turn high rpm's if they regear. This is simply not the case. Remember, the Auto trans has a double overdrive. See the below examples:

Nitro Master kits include name brand OE quality bearings.

The 2016-2023 Tacoma is a fantastic vehicle, the new engine packs a punch into a fairly small displacement, and needs RPM's to operate efficiently and at peak performance. We have found the factory gearing to be inadequate even on stock vehicles in many cases. By re-gearing your diffs with a Nitro Gear Package you can restore performance and economy by optimizing the RPM range your engine runs at. We've already provided gears for hundreds of the 2016+ Tacoma, with excellent feedback and reports of much better drivability, performance, and economy. Many say that they love that their truck is not constantly shifting, and just feels “right".

Here are some rough recommendations based on tire sizes for the average daily driver / weekend warrior:

31"-33" 4.88

34" or larger 5.29 (Great for especially loaded trucks, or towing. Also ideal for 4 cylinder trucks)

Stock 2019 Tacoma TRD Offroad w/ Auto Trans:

3.91 & Stock Tire, ~1500 RPM @ 60 MPH, ~1750 RPM @ 70 MPH (NOT ENOUGH RPM!)

4.88 & Stock Tire, ~1950RPM @ 60 MPH, ~2200 RPM @ 70 MPH

33" 4.88, ~1750 RPM @ 60 MPH, ~2000 RPM @ 70 MPH)

33" 5.29, ~1900 RPM @ 60 MPH, ~2250 RPM @ 70 MPH)

*Manual trans RPM figures will be higher.

RPM Figures are similar for Overseas Hilux Revo. And yes, even if you have a diesel, you will still benefit from the gearing. 4.88 is ideal for 33-35" on Turbo Diesel models. We have actually toured 1000's of miles of the Australia in a Diesel Hilux with 35" and 4.88, and it performed flawlessly.

Automatic:

Stock-33" 4.88 Most Popular

33"+ 5.29 Most Popular

Manual:

32-34" 4.88 Most Popular

34"+ 5.29 Most Popular

Gear Packages for 2016-2023 Toyota Tacoma 4x4:

Click here for Models w/ 8.75 Rear (TRD Offroad, TRD Pro, and all Manual Trans)

Click here for Models w/ 8" Rear (Automatic TRD Sport, Sr5, LTD)

Installation: Labor charge for a regear is generally about 12 hours. We also recommend Nitro Gear lube. We do offer professional installation in our Cashmere, WA Facility and generally need the truck for 1-2 days.

*Figures are for 4x4, 2wd only need 1 end done, so cost is much less.

Nitro Complete Gear Package Includes:

Front ring & pinion

Front Master Install Kit including upgraded solid pre-load spacer

Rear ring & pinion

Rear Master Install Kit including upgraded solid pre-load spacer

We at Nitro Gear & Axle realize the difficulty for the average consumer or install shop to compile the list of parts and prices required when doing a gear change. To make it easier for everyone the experts at Nitro are introducing an industry first- "Gear Packages" for many popular 4x4 Fits. One part number. One price. One click away.

Note:Does not fit dana built rear axle

Video

Video

WARNING:

This product can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov

Features

Nitro Rings & Pinions:
  • 8620 Steel Gear Forgings
  • Precision Machining
  • CNC Triple-lapping
  • Heat Treatment
  • Rockwell Hardness Tested
Nitro Master Install Kits:
  • Koyo or OEM Carrier Bearings
  • Koyo or OEM Pinion Bearings
  • Pinion Nut
  • if applicable
  • Pinion Seal
  • Crush Sleeve or Preload Shims or Solid Spacer
  • Carrier Shims
  • if applicable
  • Gasket or Silicone
  • Loctite
  • Gear-marking Compound and Applicator Brush

Specs

  • Front Differential: Toyota 8" Reverse, Clamshell
  • Rear Differential: Toyota 8.75"
  • Gear Ratio: 4.88 or 5.29
  • Manufacturer: Nitro Gear & Axle
  • Warranty: 2 Years

FITMENT

2016 & newer Toyota Tacoma & Hilux

WARRANTY

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion - Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.

More Information

  • Weight:

    50
  • Packaging:

    • Front Differential: Toyota 8" Reverse, Clamshell
    • Rear Differential: Toyota 8.75"
    • Gear Ratio: 4.88 or 5.29
    • Manufacturer: Nitro Gear & Axle
    • Warranty: 2 Years

Trusted Experts

Low Price Guarantee

Lowest Price Guaranteed!

We beat any price. Call for details

Easy Returns

Free shipping over $150

Any single, or combination of items

Low Price Guarantee

30 Day Return Guarantee

Something wrong? Return it!

Reviews

Product Questions

Customer Questions
No Questions
Who Viewed This Also Viewed
Performance Accessories PA6727 Gap Guards for Ford Ranger 1983-1997
Performance Accessories PA6727
$141.00
2005-2023 Tacoma 4x4 & PreRunner - 2.5" Lift Kit by Daystar
Daystar KT09120BK
$170.00
Fox 980-26-968 (with 7" to 9" suspension lift) 2.0 Performance Series Reservoir Smooth Body Shock - Adjustable - (Front / Each)
Fox 980-26-968
Special Price $429.95 Regular Price $614.21
SuperSprings ITL-5 SuperSprings Leaf Pack Clamp Tool
SuperSprings ITL-5
Special Price $51.99 Regular Price $74.27
Performance Accessories PAJL075PA 0.75" Leveling Kits for Jeep Wrangler JK 2007-2018
Performance Accessories PAJL075PA
$31.99
Bilstein 25-304879 B8 5160 Series 2-3" Front Shock Absorber for Jeep Gladiator 2020-2024
Bilstein 25-304879
Special Price $270.00 Regular Price $385.71
Old Man Emu 60133 Nitrocharger Sport Rear Shock Absorber for Toyota Hilux 150N 2015-2021
Old Man Emu 60133
Special Price $127.00 Regular Price $181.43
Bilstein AK7114R04 M 7100 Series Suspension Shock Absorber
Bilstein AK7114R04
Special Price $267.00 Regular Price $381.43
NEW
Toytec Lifts TTBOSSTAC-2016ALM-2 2"-3" Aluma Series Boss Supension System with Tuff Country Ball Joint UCAs for Toyota Tacoma 2016-2023
Nitro Gear & Axle is a DPI Offroad Brand. When you buy Nitro Gear & Axle from DPI Offroad, you are buying direct from the manufacturer.
loader
Loading...