2007-2021 Toyota Tundra 5.7L Nitro Gear Package

Brand: Nitro Gear & Axle
Part Number: GPTUNDRA5.7-XXX

Options

Free shipping over $75
Check your Fitment

Vehicle Fitment

  • Toyota Tundra (2007-2021)

Description

2007-2021 Toyota Tundra 4.88 or 5.29 Ratio Nitro Front & Rear Gear Package

Recommended: 6 quarts of Nitro Synthetic Plus Gear Lube

Gear Package Kit Includes:

  • Nitro front ring & pinion

  • Nitro front Master Install Kit

  • Nitro rear ring & pinion

  • Nitro rear Master Install Kit

Suffering from poor performance and reduced fuel economy resulting from oversized tires?

A Nitro gear change will help get that performance and economy back!

If you've fitted larger tires to your vehicle then you are likely experiencing a loss in performance, fuel economy, and more constant transmission gear "hunting"-This is because the larger tires reduce your engine's RPMs below the optimal power band. Re-gearing the differentials in your vehicle is the only way to get your vehicle back into its optimal operating RPM range, thus improving performance and reducing strain on your vehicle's drivetrain. This is especially important for today's vehicles as they feature tall factory gearing and overdrive transmissions which are less tolerant to increase in tire size or the weight of added accessories.

It's a common misconception that gear changes are reserved only to hardcore off-roaders or trucks with huge tires. However, re-gearing is one of the single most beneficial modifications you can make to keep the performance, economy, and durability of your daily-driven 4x4. This is a mod for anyone with larger tires, increased weight, or for increased performance on stock vehicles for towing or increased acceleration.

Nitro Gear Package for 07+ Tundra is one of Nitro's biggest sellers. Why? Because these trucks need regeared. The Tundra has a very tall overdrive in 5th AND 6th gear to turn low RPMS. If you are running 33" or larger tires, the 6th gear becomes near useless and all that great horsepower the 5.7L makes can be wasted. This also causes constant shifting, poor economy, and poor acceleration. By regearing you can bring the motor back to the RPM it was intended to run. This will improve Economy, Performance, and shifting. This is one of the most important modifications you can make after installing larger tires on your late model Tundra. This is the only way to properly compensate for the increase in tire diameter.

4.88 Most popular for 33-35" tires (4.88 & 35" tires, ~1750 RPM @ 60 MPH, ~2000 RPM @ 70 MPH)

GPTUNDRA5.7-4.88

5.29 Most popular for 35+" tires (5.29 & 37" tires, ~1775 RPM @ 60 MPH, ~2100 RPM @ 70 MPH)

GPTUNDRA5.7-5.29

As for traction, none of the 07+ Tundras come with an LSD (Posi), The factory “Electronic LSD" is just traction control, and is more “P.O.S" than “POSI". All tundras can benefit from the increased traction that an aftermarket LSD or Locker will provide. Another benefit is strength. Gear change and/or Posi/Locker install does not cause issues with the factory electronics. The Tundra uses a huge 10.5" diff that is much larger than any other ½ ton pickup produced. The problem is the factory Standard Open (non-posi) carrier is very weak by design, and has already failed in many stock pickups, this is all the more reason to add An Auburn Pro LSD or an ARB Air Locker to the rear.

We at Nitro Gear & Axle realize the difficulty for the average consumer or install shop to compile the list of parts and prices required when doing a gear change. To make it easier for everyone the experts at Nitro are introducing an industry first- "Gear Packages" for many popular 4x4 Fits. One part number. One price. One click away.

Features

    Nitro Rings & Pinions:

  • 8620 Steel Gear Forgings
  • Precision Machining
  • CNC Triple-lapping
  • Heat Treatment
  • Rockwell Hardness Tested
  • Nitro Master Install Kits:

  • Koyo

Specs

Front Differential: Toyota 9" Clamshell

Rear Differential: Toyota 10.5"

Gear Ratio: 4.88 or 5.29

Manufacturer: Nitro Gear & Axle

Warranty: 2 Years

FITMENT

2007-2021 Toyota Tundra 4x4 with 5.7L V8

WARRANTY

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion - Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.

More Information

  • Weight:

    62
  • Packaging:

    Box Weight: 62 lb

    Box Dimensions: 1 x 1 x 1 in

Trusted Experts

Low Price Guarantee

Lowest Price Guaranteed!

We beat any price. Call for details

Easy Returns

Free shipping over $150

Any single, or combination of items

Low Price Guarantee

30 Day Return Guarantee

Something wrong? Return it!

Reviews

Product Questions

Customer Questions
No Questions
Who Viewed This Also Viewed
Firestone 2366 Ride-Rite Air Spring Lift Spacer
Firestone 2366
Special Price $118.09 Regular Price $168.70
2007-2019 Ford Expedition  4wd & 2wd (w/ rear coil springs)- 22 mm diameter  Rear Sway Bar by Hellwig
Hellwig 7688
Special Price $345.37 Regular Price $493.39
7.2" GM Stub Axle Bearings, 1.5" OD
Nitro Gear & Axle BCAB2010
$23.82
Tuff Country 16990XX 6" Lift Kit (w/1-piece sub frame)
Tuff Country 16990
As low as $1,614.38
1969-1993 Dodge Truck 1/2 & 3/4 ton 4wd - Tuff Country REAR 6" EZ-Ride Leaf Springs (each)
Tuff Country 39670
$376.95
Bilstein 24-291699 AK Series Suspension Shock Absorber
Bilstein 24-291699
Special Price $103.73 Regular Price $148.19
Ford 9 Inch HD Large Diameter Axle Rear Wheel Bearing and Retainer Kit Nitro Gear & Axle
Nitro Gear & Axle AKF9-NITRO-B
$61.99
Dana 60 4.11 Ratio Reverse Ring And Pinion Nitro Gear and Axle
Nitro Gear & Axle D60R-411R-NG
$399.00
2009-2018 Dodge Ram 1500 4X4 - 2.5" Front / 1.5" Rear Lift Kit by Tuff Country
Tuff Country 32102
$247.35
Nitro Gear & Axle is a DPI Offroad Brand. When you buy Nitro Gear & Axle from DPI Offroad, you are buying direct from the manufacturer.
loader
Loading...