1995-1997 Chevy S-10 Blazer 2wd & 4x4 - 2" Body Lift Kit

Main image Click to view image in fullscreen 2 Inch Body Lift Kit for 1995-1997 Chevy S-Blazer 2WD/4WD Gas by Performance Accessories

Brand: Performance Accessories
Part Number: PA132

In stock

5 Star Excellence award from Shopper Approved for collecting at least 100 5 star reviews

Free shipping over $75

Check your Fitment |

Vehicle Fitment

Chevy S10 Blazer (1995-1997)
GMC Jimmy (1995-1997)

Description

This Performance Accessories PA132 Body Lift Kit will lift your Chevy S-10 Blazer 2 inches without modifying the factory suspension. This will allow for larger diameter tires for increased ground clearance and an aggressive off-road look. Designed to fit Chevy S-10 Blazer 4x4 & 2wd models in the year range 1995 thru 1997.

High Grade Materials - This Chevy S-10 Blazer 2" body lift kit uses extremely durable lift block's that are constructed of a high grade reinforced nylon along with extended body bolts, required hardware and brackets. The blocks install between the body and the frame where your factory body mounts reside. Grade 5 zinc plate extended bolts replace the factory body mount bolts.

Better Ride Quality - Because the factory suspension is not altered, your ride quality will not be changed. No front alignment is required along with no extended shocks required by installing this body lift kit. Unlike many suspension lift kits that will create a harsh ride and change the suspension geometry requiring a front end alignment.

Proudly Made in the USA - Performance Accessories (A Daystar Company) body lifts are all made in the USA using high quality zinc plated hardware and powder coated brackets.

Features

Will Not Change Ride Quality
Addes 2 inches of Lift, Factory Suspension Not Altered
Mounts Between Body and Frame
Allows for Larger Tires
High Grade Fiberglass Reinforced Nylon Body Lift Blocks
No Front End Alignment Required
Center of Gravity is Not Changed
Plated Brackets Resist Corrosion and Rust
Includes all Hardware for Bolt-on Installation
Replacement Shocks are Not Required
Made in the USA

Specs

Material: Nylon/Steel
Color: Black
Finish: Zinc Plated
Drive: 2WD|4WD
Location: Front/Rear
Hardware Included: Yes
Lift Height: 2 Inch
Installation Time: 6-7 Hours
Sold As: Kit
Vehicle Type: Truck/SUV
Country of Origin: USA

Installation Notes

1. Some suspension lift kit manufactures do not recommend the addition of any body lift kit. If you have or are planning to install a suspension lift and a body lift kit please refer to the suspension lift kit manufacture or contact us for more information.
2. Note: Image shown is a representation of this part. Actual part may vary.
3. Front bumper bracket are included in this kit.
4. S-10 Blazers equipped with Vortec V-6 may require modification of the air intake or air intake
5. Rear bumper can be raised using the stock bumper brackets.
6. 1995-99 ZR2 will require modification to steering column mounting flange.