1991-1997 Toyota Land Cruiser without E-Locker Nitro Gear Package

Brand: Nitro Gear & Axle
Part Number: GPFJ80-XXX-1

Options

Free shipping over $75
Check your Fitment

Vehicle Fitment

  • Lexus LX 450 (1991-1997)
  • Toyota Land Cruiser (1991-1997)

Description

Toyota Land Cruiser 70/80 Series without OEM E-Locker Nitro Front & Rear Gear Package

Recommended: 6 quarts of Nitro Synthetic Plus Gear Lube


Gear Package Kit Includes:

  • Nitro front ring & pinion
  • Nitro front Master Install Kit
  • Nitro rear ring & pinion
  • Nitro rear Master Install Kit
  • Front solid pre-load spacer
  • Front pinion flange
  • Rear solid pre-load spacer

Suffering from poor performance and reduced fuel economy resulting from oversized tires?

A Nitro gear change will help get that performance and economy back!

If you've fitted larger tires to your vehicle then you are likely experiencing a loss in performance, fuel economy, and more constant transmission gear "hunting" - This is because the larger tires reduce your engine's RPMs below the optimal power band. Re-gearing the differentials in your vehicle is the only way to get your vehicle back into its optimal operating RPM range, thus improving performance and reducing strain on your vehicle's drivetrain. This is especially important for today's vehicles as they feature tall factory gearing and overdrive transmissions which are less tolerant to increase in tire size or the weight of added accessories.

It's a common misconception that gear changes are reserved only to hardcore off-roaders or trucks with huge tires. However, re-gearing is one of the single most beneficial modifications you can make to keep the performance, economy, and durability of your daily-driven 4x4. This is a mod for anyone with larger tires, increased weight, or for increased performance on stock vehicles for towing or increased acceleration.

Features

    Nitro Rings & Pinions:

    Nitro Master Install Kits:

  • Koyo

Specs

Front Differential: Toyota 8" Reverse

Rear Differential: Toyota 9.5"

Gear Ratio: 4.10, 4.56, 4.88 or 5.29

Manufacturer: Nitro Gear & Axle

Warranty: 2 Years

FITMENT

1991-1997 Toyota Land Cruiser 70 Series:

FJ70, FJ71, FJ73, FJ75, FZJ70, FZJ71, FZJ73, FZJ75, HZJ70, HZJ71, HZJ73, HZJ75

1991-1997 Toyota Land Cruiser 80 Series:

FJ80, FZJ80, HZJ80, HDJ80

1991-1997 Lexus LX450

WARRANTY

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion - Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.

More Information

  • Weight:

    47
  • Packaging:

    Box Weight: 47 lb

    Box Dimensions: 1 x 1 x 1 in

Trusted Experts

Low Price Guarantee

Lowest Price Guaranteed!

We beat any price. Call for details

Easy Returns

Free shipping over $150

Any single, or combination of items

Low Price Guarantee

30 Day Return Guarantee

Something wrong? Return it!

Reviews

Product Questions

Customer Questions
No Questions
Who Viewed This Also Viewed
Bilstein 33-250793 M 9200 (Bypass) Series Suspension Shock Absorber
Bilstein 33-250793
Special Price $1,476.00 Regular Price $2,108.57
1/2" Leaf Spring Center Pins (pair)
Tuff Country 92012
$10.95
Tuff Country 35922XX 4.5" Lift Kit (fits models w/o factory overloads)
Tuff Country 35922K
As low as $1,056.08
Timbren DRTT3500D (Cab & Chassis) - "Heavy Duty" SES Suspension Kit - (Rear)
Timbren DRTT3500D
Special Price $398.07 Regular Price $568.67
1989-1995 Toyota Truck 2wd & 4x4 standard & extra cab (EXCEPT AUTO TRANS) - 2" Body Lift Kit
Performance Accessories PA5502M
$254.00
Tuff Country 97030 4" Rear Block & U-Bolt Kit 4wd for Chevy Silverado 1500 1999-2005
Tuff Country 97030
$146.95
Firestone 9294 Airide Reversible Sleeve Air Spring 1T15LP-5
Firestone 9294
Special Price $338.38 Regular Price $483.40
80W-140 Nitro Para-Synthetic Plus Gear Oil GL5 (6 Quarts)
Nitro Gear & Axle NPLUBE-6
$161.94
Dana 70 D70 Rear Master Install Kit Nitro Gear and Axle
Nitro Gear & Axle MKD70
$276.00
Icon 1217857347SB Alpha 17" x 8.50" Wheel - Satin Black
Icon Vehicle Dynamics 1217857347SB
Special Price $314.99 Regular Price $449.99
Nitro Gear & Axle is a DPI Offroad Brand. When you buy Nitro Gear & Axle from DPI Offroad, you are buying direct from the manufacturer.
loader
Loading...